Overview
If you receive the error message "No Corner Found for Corner Cabinet", it means Mozaik cannot detect a valid corner in the room layout. This typically occurs when the walls are not properly joined at their intersection points.
Cause
Corner cabinets require two connected walls that form a valid corner. If the wall endpoints are not joined, Mozaik cannot recognize the corner location.
Resolution
Follow the steps below to connect the walls and resolve the error.
Step 1: Identify the Wall Intersection
- Locate the two walls that should form the corner where the cabinet is being placed
- Ensure the wall endpoints meet visually
Step 2: Join the Wall Corners
- Right-click on the two wall points that intersect
- Select the option to connect the corners
- When prompted with the join confirmation message, select OK
Step 3: Verify the Connection
- After joining, the wall connection indicator (dot) will change color from orange to red
- This color change confirms the walls are now properly connected
Step 4: Place the Corner Cabinet
Once the walls are joined, attempt to place the corner cabinet again. The cabinet should now insert without error.
Result
After properly joining the wall corners, Mozaik will recognize the corner and allow placement of a corner cabinet.
Additional Notes
- Always confirm wall connections when importing or editing room layouts
- Visually connected walls may still need to be joined manually