Sadek Akl
- Total activity 31
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 0
Activity overview
Latest activity by Sadek Akl-
Sadek Akl created an article,
Troubleshooting Breaking Tools at the Collet
CNC Tool Breaking at the ColletOverviewIf a CNC cutting tool breaks at or near the collet, this is almost always related to tooling setup, cutting parameters, or mechanical conditions rather than s...
-
Sadek Akl created an article,
Job Files Missing After Update
Job Files Missing After UpdateOverviewIf job files appear to be missing after performing a Mozaik update, this is typically related to file location settings or file management outside of Mozaik. I...
-
Sadek Akl created an article,
Parts Not Sending to the Optimizer
OverviewIf parts are not appearing in the Optimizer, there are several configuration settings that can prevent them from being sent correctly. These settings may be applied at the door, part, mater...
-
Sadek Akl created an article,
Missing Tool Error in Optimizer (Cutout By Material)
OverviewIf you encounter issues with Cutout By Material not functioning as expected, this is commonly caused by a discrepancy in the cutout tool assignments within the toolset. This typically occur...
-
Sadek Akl created an article,
Adding Banding Labels to parts in Mozaik Optimizer
How to Add Banding Labels to PartsApplies ToMozaik OptimizerParts with edge banding appliedStepsOpen the Optimizer.Navigate to Settings → Preferences.Select the Drawing tab and Enable (toggle on) B...
-
Sadek Akl created an article,
"Post File Missing" Error
Post File Missing Error – Edit Machine CNC RouterOverviewIf you encounter the error message “Post File Missing – Edit Machine CNC Router”, it indicates that Mozaik is unable to locate or apply a po...
-
Sadek Akl created an article,
Mozaik Latency Issues
Improving Render Performance and Load Times in MozaikOverviewIf you are experiencing lagging renders or slow load times in Mozaik, adjusting certain system and 3D display settings can help improve ...
-
Sadek Akl created an article,
How to Create and Transfer Labels
Creating and Transferring Custom Label Templates in MozaikThis guide walks through how to create a custom label template in Mozaik and how to transfer those labels for use in CNC Operator.Creating ...
-
Sadek Akl created an article,
Drilling Failed to Find Tool Troubleshooting
Resolving the “Drilling Failed to Find Tool” Error in MozaikWhen generating machining operations, you may encounter the error:“Drilling Failed to Find Tool”This indicates that Mozaik cannot locate...
-
Sadek Akl created an article,
Installation Not Successful Error
Troubleshooting Installation Failure When Updating to Mozaik 14.1If you encounter an installation error while updating Mozaik to version 14.1, the issue is typically caused by Windows security res...