Sadek Akl
- Total activity 67
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 0
Articles
Recent activity by Sadek Akl-
Mozaik System Requirements
Mozaik System RequirementsTo ensure smooth performance and full compatibility, we recommend reviewing Mozaik’s current computer hardware and software requirements. Using a system that meets or exc...
-
How to cancel your subscription
This guide provides step-by-step instructions for cancelling a Mozaik subscription through your Cyncly account portal. Time: 2 minutes Difficulty: Beginner To cancel a subscri...
-
Mozaik - How to Request a Post Processor in Mozaik
Outlined below are the steps to requesting a Post Processor and Scheduling your Post Integration session (Initial Hour is free, each additional hour is billed at $95 per hour). 1) The first step i...
-
Utilizing Notch for T-Wall
Do you ever run into a situation where you need to build a cabinet around an obstacle? Use the Mozaik "notch around a T-wall" feature to help you automatically build your cabinet around the obstacl...
-
Set up Room Tab for Cabinet Heights & Elevations
Tired of wasting time constantly adjusting cabinet heights and elevations? Start the your design off right by setting up your Room Tab Height settings. Step 1:On the Room Tab, choose your default H...
-
Equalize Cabinet Widths
You can have Mozaik automatically equalize the widths of your products by selecting multiple adjacent cabinets, Right Click, and select "Equalize Widths". Step 1:1) Select the Products Tab2) Left C...
-
Using Batch Optimize and Batch GCode
Utilizing Batch Optimize & Batch GCode will allow you to Nest and then GCode all of your Materials & Parts without repeating Steps! Step 1:1) Select the Optimize Tab2) Choose Batch Optimize3) Selec...
-
Chip Load Chart & Calculator
All good tools require care to work their best. Tool maintenance is a variable cost that can be controlled by optimizing the chip load of your tools. Three factors will affect the life of the tool ...
-
Use SketchUp to change Models
Mozaik uses SketchUp Models for graphics suchs as Windows, Doors, and Appliances. If you want to change them, you can do this in SketchUp. Step 1:1) Select Libraries2) Open Products Step 2:1) Choos...
-
Waterfall Countertop Edge
You can quickly and easily make a waterfall style on Countertop Edges Step 1:1) Navigate to the Tops Tab 2) Right Click on the Drawn Countertops3) Select "Edit Shape on Floor Plan"Step 2:1)Right Cl...