How to Generate a Sink Cutout in a Countertop

Overview

This article explains how to correctly generate a sink cutout in a countertop using Mozaik. Proper placement and regeneration steps are essential for the software to recognize and apply the opening.

Steps to Create a Sink Cutout

1. Place the Sink on the Product

Start from either the Room tab or a Product Library.

• Select your sink fixture.
• Position it on the product where the cutout should appear.
  Important: The sink must be placed accurately so Mozaik knows where to generate the opening.

2. Regenerate Cutouts on the Countertop

Once the sink is properly positioned:

1. Navigate to the Tops tab.
2. Right-click on the countertop.
3. Choose Regenerate Cutouts from the context menu.

This triggers Mozaik to analyze the fixture placement and generate the sink opening.

3. Verify the Cutout Recognition

After regeneration, you should see:

• A green outline
• Corresponding text indicating the sink cutout

If these appear, Mozaik has successfully identified the sink’s location and applied the cutout.

4. Edit the Cutout Properties (Optional)

To further adjust the opening:

1. Right-click directly on the generated cutout area.
2. Select Cutout Properties.

From here, you can modify dimensions, offsets, shapes, and other cutout details.

Need Additional Help?

If the sink cutout does not appear or the software does not recognize the placement:

• Double-check that the sink is fully seated on the product.
• Ensure the sink is compatible with cutout generation.
• Contact the Mozaik Help Desk with your current job file and screenshots of the layout for further assistance.