If you want to create a SpoilBoard Program, please see the following instructions:
- In the Optimizer, go to Libraries-Machines-Setup CNC Router
- Click 'Spoil Board Resurface'
- From here, choose the Pattern & Tool, and enter the Tool Holder Position the Spoil Board Tool will be placed in.
- Set the Depth of the Resurfacing Program
- Set the Dimensions of the Spoil Board (It is recommended that you increase the size by 1/16" to ensure the entire Spoil Board is machined)
- When the settings are done, click 'Generate GCode Program'
- Your Spoil Board Program will be saved as 'FlyCut' and saved in the C:/Mozaik/Jobs Folder