Sadek Akl
- Total activity 87
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 0
Articles
Recent activity by Sadek Akl-
Tool Library – Tool Properties Tab Overview
OverviewThe Tool Properties Tab in Mozaik is where all CNC tool parameters are defined and controlled. These settings directly affect how tools behave during machining, including cutting depth, fee...
-
How To Configure Drawer Guides
OverviewThis guide explains how drawer guides (slides) are configured in Mozaik and how those settings are used to automatically size and apply drawer boxes. Drawer guide configuration is handled t...
-
MultiPrint Dimension Discrepancies
OverviewIf dimensions or annotations shown in MultiPrint do not match what is displayed in the Product tab, this is usually caused by drawing template settings or layer overrides within MultiPrint....
-
No Tool Found for Pocket in Part Error
OverviewIf you receive the error message "No tool is found for pocket in part", it indicates that a pocket operation exists on the part but no tool has been assigned to perform that operation. Unti...
-
Enabling Small Parts Handling in the Optimizer
OverviewMozaik includes Small Parts Handling options within the Optimizer to help prevent small parts from shifting, tipping, or becoming damaged during the nesting and cutting process. These setti...
-
No Corner Found for Corner Cabinet Error
OverviewIf you receive the error message "No Corner Found for Corner Cabinet", it means Mozaik cannot detect a valid corner in the room layout. This typically occurs when the walls are not properly...
-
Cutout Tool Priority and Cutout by Material
OverviewMozaik uses a single primary cutout (profile) tool from a toolset unless otherwise specified. Understanding how Mozaik prioritizes cutout tools—and how to override that behavior using Cutou...
-
"Files Created from a Newer Version of Mozaik" Error
OverviewIf you receive the error message "These files were created from a newer version of Mozaik", it means the files you are attempting to open or import were saved using a more recent version of...
-
Troubleshooting Breaking Tools at the Collet
CNC Tool Breaking at the ColletOverviewIf a CNC cutting tool breaks at or near the collet, this is almost always related to tooling setup, cutting parameters, or mechanical conditions rather than s...
-
Job Files Missing After Update
Job Files Missing After UpdateOverviewIf job files appear to be missing after performing a Mozaik update, this is typically related to file location settings or file management outside of Mozaik. I...