Jakob B.
- Total activity 148
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 125
Articles
Recent activity by Jakob B.-
Adjustable shelf pin notch
The following article is intended to provide a custom parameter approach to shelf pin notches: Attached to this article is a custom product. You'll want to import it under Edit->Job Parameters for...
-
Glass door with rabbet for glass
This article was created to show how to produce the rabbet for a glass door. Start by creating a Panel Tool Group using tools available in the toolset.:For that, go to Optimizer Library CNC Tooling...
-
Short waterfall edge
The waterfall always extends all the way to the floor. However, if you wish to make a shorter waterfall you can use the following method. Please watch the screen recording below:
-
Inset doors with stretchers/partitions
By default, Frameless Inset construction does not accommodate the interior components. However, Mozaik provides a work around method by modifying the interior. Please watch the screen recording be...
-
Copying Products to Different Library
This article was created to show how to copy products to a different library: Open the library folder with the product you want to copy and the folder of the library you're adding it to.Copy the .m...
-
Wood Frame for Appliances
To make wood frame for appliances:Split the "Face" using "Panels" and adjust the inset and reveals as needed.(See image below)
-
Offsetting Closed Toolpaths
The following article was created to display how a toolpath can be offset:Add Closed Toolpaths to the part and locate them accordingly.Make sure to select a depth and to assign a tool for the Toolp...
-
Importing a Sketchup File Into Product Library
Please see the following steps for importing a Sketchup File into your Product Library: Download & place the Sketchup file in C:\Mozaik\Product Libraries\\Products Open Mozaik Go to Libraries-Produ...
-
Change Lock Dowel Tool Path Direction
To adjust the direction of the Lock Dowel Tool Path, you just need to make one minor modification in the Joint Fastener template. Go to the Joint Fasteners Section (Libraries->Hardware->Fasteners) ...
-
Slotted Cubbies help
Here are some tips to point you in the right direction: -Find the measurements using the 2D viewer. Measure Left to Right and bottom to Top.-In this example I set the Fixed Shelf Dado to "0"-At the...