Mozaik Version 14.1

• A new install and update utility is now used to install or update Mozaik and add-ons.
• Note: This installer requires a network connection.

• New Print Part Drawings feature to print dimensioned drawings of each part and part operation to aid with manual processing.
• Mozaik Manufacturing customers can now view part operations in the 2D and 3D viewer.
• Added continuous dimension tool.
• Part Drawing w/ Banding label drawings should now respect part rotation.
• Face schematics will now show part length/width and face size dimensions according to proper part size if available.
• Added new Face Frame Dimensions layer to face drawings in Multiprint, as well as the elevation view, to show both length and width of face parts.
• Added preferences to default 2D and 3D views to Medium operation detail, which shows most operations as cut-outs of the part (except dovetail drawer operations and bore holes).
• Multiprint text editor now accepts the Enter key as a carriage return (and is slightly larger by default).
• Added new Auto-number Room options to Global Preferences (For example 101, 201, 301...).
• Fixed an issue causing Multiprint tab object settings defaults not to load properly after changing jobs.
• Improved the appearance of dimension end caps in floorplan and elevation views to scale properly when zooming.
• Improved adding templates and template pages in Assembly Sheet and Part Drawing Manager.
• Added Display Opening Labels option to the Optimizer Patterns and Labels tabs.

• Custom cutlist tables are now available to display and print on the Cutlist tab.
• Added separate room number and cabinet number variables to most label types, along with assembly sheets and part drawings.
• New fields {Texture2} and {TexAbbr2} can be added to material report names and abbreviations to use the outside texture to define the material.
• Added new Cab# (QTY) column to custom cutlist reports (does not show room number).
• Material template is now available as a column in the Dwr_Box_Tray_Sizes cutlist type for custom cutlist tables.
• Printing assembly sheets now assumes you want to add a new run by default, eliminating extra clicks.
• Job and room notes are now available as variables in pricing reports and custom cutlist reports.
• Added run name to Patterns tab printout.
• Added Profile1, Profile2, and Profile3 columns to Door Sizes custom cutlist reports.
• Added a checkbox for custom cutlist tables to turn off parentheses on the quantity column.
• Part type is now available as a column in various custom cutlist tables—this can help with constraints but is not intended for display.

• New parameter: 32mmBkLBThru - back linebore will move to the flipside if it would avoid flip ops
• End-to-end and face-frame-to-face-frame joints will now automatically appear as mitered. This can be turned off via the new parameters EndMitreEnd and FrameMitreFrame
• New parameter: ShelfHMinSep - adds multiple shelves to automated interiors with specified minimum separation
• New parameter: 32mmBkLBMinW - cabinets less than this width will receive only centered line bore on backs
• Added 7.5mm option to SysHoleDia parameter
• Added several new parameters that apply to toe subassemblies - SleeperDadoD, BackToeBetween, SideToeDadoD, ToeStretcherDadoD (and more)
• Stretchers may now be applied to the top of toe subassemblies
• Continuous toe subassemblies will now respect maximum width when being placed
• New parameter: ToeSkinMaxL - sets the maximum length possible for a toeskin (defaults to 96")

• Added new Banding Before Secondary Machine checkbox to machine template dialog
• New machine autolabel post system
• New multidrill post system - quick drill substitutions, prefer thru bore option, better ability to find drill patterns, pecking, ability to set different plunge rate for thrubore
• Added ability to output gcode files with flip and topside combined. Use <CombineTopsideAndFlipsheetIntoOneFile> postvar and {TRANSITION} gcode section.
• SCM XXL Single part post
• Added cabinet name {cn} to custom gcode filenames
• Added new optional Allow Rotation column in the parts tab
• Added Duplicate Run button to Runs tab in Optimize
• Added 91 degree sharp corner tool
• Added ability to download (or request) post processors/machine definitions from the cloud (via the Help menu or the Machines dialog)
• Adding new Dowel checkbox to male edge operations - MPR posts will now check this before applying gluing and doweling to an edge hole
• When using Full Sheet skin, feed reduction will only be applied to small parts
• Added new postvar <SinglePartDoCutout> to perform a cutout toolpath on single part processors
• Added the ability to import a Blum BXF2 file to the Optimizer's parts list.

3D Viewer

• Floors and ceilings now allow you to look through them into the room when in the 3D viewer
• Render export will now remember previously selected title block
• Added Clear All button to 3D viewer layers dialog
• Page numbers no longer included on cloud render printouts if using a title block
• Added the ability to use PBR texture maps in the Cloud Renderer

Materials

• Added Replacement Rules feature.
• Removed auto-creation of textures/materials when loading an old job.
• Edgebanding templates can now apply to Frameless Rail and Nosing parts.

Inserts

• Formulas may now be added to insert operation hole/linebore diameter, linebore hole quantity, and dado groove angle.
• Added new Inset (L/R) column to insert operation table.

Fasteners

• Added an option to place drawer front fastener operations on the flipside.
• Added new joint fastener type for Drawer Bottom to Drawer Face.

Drawer Boxes

• Added No Front checkbox to Drawer Front library.

• Added several features to MD2 configurations - added a "Use for Single" checkbox for multidrill tools, as well as a "Restrict Axis" checkbox to prevent drillblocks from firing drills along both the X and the Y axis at the same time. Tools of differing diameters are now permitted to fire at the same time if their various speeds and thru bore numbers are identical. Also fixed an issue that could cause AlongX and AlongY to return incorrect values in MD2 macros.
• Fixed an error that can occur when generating custom cutlist reports
• Fixed an error that can occur when exporting to Paperless Shop Apps
• Fixed an issue that could cause incorrectly placed hbore operations
• Fixed an error that can occur when setting grid size to 0
• Fixed an error that can occur when using certain door shapes
• Added "None" tool option for new multidrill posts

• Fixed an issue that can cause metal guides with tray faces to select the wrong guide length
• Fixed an issue that could cause toe skins not to appear in the cutlist when certain parameters are turned off
• Importing images into multiprint should no longer automatically place inside unfocused drawings
• Fixed an issue that could cause cabinet right views not to show up on cabinet labels
• Fixed an issue that could cause missing front stretchers in certain cabinet face configurations
• Fixed a few errors that can occur while cloud rendering
• Fixed an issue that could cause drawer front face sections to show incorrect opening heights on elevation
• Fixed an issue that could cause interior section dividers not to allow face locking on certain blind corner cabinets
• Part Drawing w/Origin and Part Drawing w/Banding images on labels should now show the same flip status as the part on the sheet
• Thru cut user toolpaths should no longer receive tabs if they are larger than the maximum specified part size
• Fixed an issue that can cause duplicate outputs when exporting cutlists to Tiger Stop format
• Fixed an issue that could cause visual artifacts in the 3D viewer for certain narrow toolpaths

• Added a new autolabel post variable for Maestro machines: 

• Added the ability to add a custom park line to Maestro machine gcode files with the 

  post variable

• Added a new post variable for MNO file generation 

  that will remove the space between the job name and material name in filenames
• Fixed an issue that could cause Biesse gcode to output dado grooves incorrectly under certain conditions
• Fixed an issue that could cause certain short dado grooves to produce rotated gcode toolpaths incorrectly
• Fixed an issue that could cause information in incorrect columns in the Cutlist tab when looking at metal drawer cutlists
• Added a warning when trying to print part drawings without a selected template
• Fixed an issue that can cause single-tool machine setups not to generate all tool files in certain cases for flip sheets/parts
• Fixed an issue that could cause edge banding materials/textures in saw exports to be incorrect for wall cabinets
• Fixed an error that can occur when viewing Sketchup models when using very small textures

• Fixed an issue that could cause incorrect shapes for shaped walls in the 3D viewer
• Fixed an exception that can occur when editing Job Manager settings
• Added better error handling for "printers not found" issues
• If an operation is severely off a part, the Product Log message will now show up as red
• Fixed an issue that can cause missing sharp corners on certain open toolpaths
• Fixed an issue that could cause hardware locks with formulas to appear in incorrect positions
• Edge banding columns in custom saw exports should now properly show {Texture} values

• New postvar 

  allows MPR single post processors to specify a ZA value for dados
• Fixed an issue that can cause PartTh formula to apply incorrectly on insert parts
• Fixed an issue that can cause incorrect clearance numbers on especially short walls
• Door drawings in Multiprint should now properly respect size-based replacements
• Fixed an issue that could cause slowdowns when using large numbers of multidrill drills
• Fixed an issue that can cause slight "skins" to appear on certain dado grooves in the 3D viewer
• Fixed an issue that can cause finished ends to change inappropriately after making edits in the Job Dashboard
• Fixed an issue that could cause advanced hinges to be placed incorrectly for top/bottom hinged doors
• Fixed an issue that can cause incorrectly placed tab cutouts
• Fixed an issue that could texture locked materials to still receive texture overrides incorrectly
• Fixed an issue that can cause group parts to appear selected incorrectly when printing labels from the Optimizer
• Fixed an issue that could cause incorrect "Face Frame Dimensions" on face drawings in Multiprint
• Fixed an issue that can cause panel fasteners to be applied incorrectly
• Fixed an error that can occur when viewing Sketchup models when using very small textures
• Fixed an issue that could cause certain machine labeling files to appear empty when using combined top and flipside
• The advanced hinges datagrid should now stretch properly with the window
• Added credit card surcharge line item to Pricing templates
• Product libraries should now be properly updated when importing them from Import Updated Data
• Assembly sheet "Front Face" drawings should now show up as "Front Face" on templates instead of "Face View"
• BXF2 part imports should now ignore certain part types that were not intended for import
• Fixed an issue that can cause the dimension tool in Multiprint not to reset properly when switching tools

• Fixed an issue that can cause incorrect gcode pathing on certain radiused corners
• Fixed an issue that can cause fixed shelves and partitions to incorrectly line up when using 32mm line bore

• Added new 

  post variable for MPR posts
• Fixed an issue that could cause stiles and rails not to show the proper width in certain views
• Fixed an issue that can cause mitering to be applied incorrectly to toe subassemblies
• Fixed an issue that could cause incorrect depth warnings in the product log for horizontal drilling
• Added a warning when attempting to change the size of a part in the shape editor rather than via the part's width or length values
• Fixed an error that can occur when printing custom reports
• Added the ability to add a CNC Test Part in the Optimizer's Parts Tab

• Added 

  and to autolabel post output for headers and footers within the GCode file
• Fixed an issue that can cause incorrect drawer guide selection

• Added 

  postvar (UTF-8, UTF-16, ANSI, GB2312 options) to allow gcode files to be output in different file encodings
• Combined top and flipside gcode files should now use the "-Flip" or "F" version of the filename
• Fixed an issue that could cause {Texture2} not to function properly for toeskins and countertops
• In custom saw exports, GCode Path/Filename/Filename-no-extension fields will no longer report flipside filenames
• The Automatically Flip Parts checkbox will now apply to single part processors

• Fixed an issue that could cause cutouts generated by 

  to offset incorrectly
• should now cut notches properly for radiused corners

• Fixed an issue that could cause single-part notch pocketing to appear in the incorrect location in parts that need to be rotated 90 degrees
• autolabel post variable should now also remove xml declarations from batch xml files
• Added better error handling to exporting saw files from the Patterns tab
• Exporting machines should now properly include autolabel post files

• Fixed an issue that could cause incorrect remnant label locations when using 

• Fixed an issue that could cause bifold hinge holes to show up on doors that have been marked not to receive boring

• Fixed an error that can occur when editing parameter override values
• Fixed an issue that can cause incorrectly drawn operations on door panels with insets
• Insert parts are now included with "panel stock" on assembly sheet cutlist tables and panel stock cutlists
• Fixed an issue that can cause slowdowns/hanging in the Optimizer
• Fixed an issue that can cause textures not to initialize properly when adding a new seat and upgrading versions at the same time

• Fixed an issue that could cause clicking on imported DXFs in Multiprint to behave incorrectly
• Fixed an error that can occur when flattening DXFs in Multiprint
• Fixed an issue that could cause materials with two different textures to rotate improperly in Optimize
• Fixed an issue that could cause incorrect tool numbers in {TRANSITION} blocks in post files
• Fixed an issue that can cause item lists in Multiprint to be scaled incorrectly when using inch or mm-based font sizes
• Fixed an issue that could cause face frame dimensions on 45-degree corner cabs to show up improperly in elevation views
• Fixed an issue that could cause choosing "Same as Base" in the Material Template editor not to "stick"
• Fixed an issue that could cause fixed shelf dados not to be applied properly on certain side-shaped products

• Length of a cabinet side needed to generate hardware legs is now 5" instead of 6"
• Fixed an issue that could cause molding and countertops to show up on the incorrect elevation
• Fixed an issue that could cause tiny discrepancies in spacing when dragging grain matched group parts in the Optimizer
• Fixed an issue that could cause panels to show incorrect textures when using single-sided materials
• Updated link to helpdesk in Mozaik
• Fixed an issue that could cause slowdowns/hanging in the Optimizer
• Fixed an issue that could cause the installer to fail to install with a message regarding access denied

• Fixed an error that can occur when selecting an operation in the shape editor
• Fixed an error that can occur when importing a toolset
• 3D view settings should now stay the same from session until Mozaik or a new job is opened, when settings will be loaded from default (including wire/hidden line/filled mode)
• Added the ability to support individual roughness, occlusion, and metallicness textures when cloud rendering
• Added better error handling to cloud render viewer
• Fixed an issue that could cause texture library not to be properly initialized after loading a full Mozaik backup
• Product log will now indicate if a part has an overridden texture
• Fixed an issue that could cause incorrect textures when setting finished interior with certain materials
• Parts marked as high detail will now show up as "medium" detail in floorplan, elevation, and 3D room views (for improved performance)
• Added some autolabel options to support SCM Flexstore

• Added better error logging to the installer
• Fixed an issue that can cause "Fade to White" to appear incorrectly on the Parts tab of the Drawing Template Editor
• Fixed an issue that could cause incorrect material references after cutting/pasting materials in the Stock Materials Library
• Hinge holes should no longer be blocked/intercepted by insert parts
• Fixed an issue that could cause WallTrim to apply incorrectly to certain faces
• Fixed an issue that could cause missing metal drawer guide holes

• Fixed an issue causing cross-section changes in Multiprint not to save.
• Resolved installer recognition issues with CNC Operator.
• Fixed errors when viewing custom cutlists or editing materials.
• Prevented the creation of duplicate material template names.
• Improved performance when closing the Optimizer.

• Fixed an issue where operations failed to export to Optimizer for Manufacturing customers.
• Fixed material editing errors in the Library.
• The Render button now automatically un-minimizes the Cloud Render dialog.
• Fixed logic for "Nest" checkboxes when sending materials to the Optimizer.
• Added filenames to label images to distinguish parts from remnants.